saw components saw filter td-lte band 40 series/type: ordering code: b9496 B39232B9496P810 date: version: august 08, 2012 2.0 ? epcos ag 201 5 . reproduction, pub lication and dissemination of this p ublicatio n, enclosures h ereto and the i nformation containe d therein without epcos' prior ex press consent is prohibited. epcos ag is a tdk group company.
2 august 08, 2012 b9496 2345.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw filter data sheet application n low-loss rf filter for mobile telephone tdscdma and td-lte band 40 system n low amplitude ripple n usable passband: 50 mhz n impedance at input and output 50 w n unbalanced to unbalanced operation features n package size 1.4 x 1.1 mm 2 n max. package height 0.45 mm n rohs compatible n approx. weight 0.003 g n package for s urface m ount t echnology ( smt ) n ni, gold-plated terminals n e lectrostatic s ensitive d evice ( esd ) n m oisture s ensitive l evel 3 1.1 1.4 1 4 5 23 0.325 0.25 0.575 0.5 0.5 bottom view 0.45 max. side view top view 4 5 1 3 2 pin configuration n 1 input unbalanced n 4 output unbalanced n 2,3,5 to be grounded 1 4 3 2,5
3 august 08, 2012 b9496 2345.0 mhz saw components saw filter data sheet please read cautions and warnings and important notes at the end of this document. characteristics operating temperature range: t = C30 ?c to +85 ?c terminating source impedance: z s =50 w terminating load impedance: z l =50 w min. typ. @ 25?c max. center frequency f c 2345.0 mhz maximum insertion attenuation a max 2320.0 ... 2370.0mhz 1.7 2.4 db amplitude ripple (p-p) da 2320.0 ... 2370.0mhz 0.8 1.5 db input vswr 2320.0 ... 2370.0mhz 1.8 2.1 output vswr 2320.0 ... 2370.0mhz 1.8 2.1 attenuation a 50.0 ... 2215.0mhz 26 31 db 2215.0 ... 2240.0mhz 35 40 db 2240.0 ... 2280.0mhz 15 26 db 2412.0 ... 2472.0mhz a wlan 1) 23 33 db 2410.0 ... 2485.0mhz 30 42 db 2485.0 ... 6000.0mhz 27 32 db
4 august 08, 2012 b9496 2345.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw filter data sheet annotation for characteristics section 1) attenuation of wlan signal (powertransferfunction, a wlan ) is determined by f carrier according to ieee802.11 n (e.g. for wlan, f carrier ranges from 2412 mhz (lowest chan- nel) to 2472 mhz (highest channel)). h rect (f) is the transfer function of a rectangular shaped filter (bw=18mhz) with the following normalization: maximum ratings operable temperature range t C40/+85 ?c storage temperature range t stg C40/+85 ?c dc voltage v dc 5 v esd voltage v esd 50 1) 1) acc. to jesd22-a115a (machine model), 10 negative & 10 positive pulses. v machine model, 10 pulses input power at 2320.0...2370.0 mhz p in 22 dbm continuous wave s s d21 f () h rect ff carrier C () 2 f d h rect f () 2 f1 = d
5 august 08, 2012 b9496 2345.0 mhz saw components saw filter data sheet please read cautions and warnings and important notes at the end of this document. transfer function transfer function (wideband)
6 august 08, 2012 b9496 2345.0 mhz please read cautions and warnings and important notes at the end of this document. saw components saw filter data sheet smith charts s 22 function s 11 function
7 august 08, 2012 b9496 2345.0 mhz saw components saw filter data sheet please read cautions and warnings and important notes at the end of this document. references type b9496 ordering code B39232B9496P810 marking and package c61157-a8-a3 packaging f61074-v8237-z000 date codes l_1126 s-parameters b9496_nb.s2p, b9496_wb.s2p see file header for port/pin assignment table soldering profile s_6001 rohs compatible defined as compatible with the following documents: "directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2005/618/ec from april 18th, 2005, amending directive 2002/95/ec of the european parliament and of the council for the purposes of establishing the maxi- mum concentration values for certain hazardous substances in electrical and electronic equipment." moldability before using in overmolding environment, please contact your epcos sales office. matching coils see http:// www .tdk.co.jp/tefe02/coil.htm#aname1 http://www.tdk.co.jp/etvcl/index.htm for a large variety of matching coils. for further information please contact your local epcos sales office or visit our webpage at w ww.epcos.com . published by epcos ag systems, acoustics, waves business group p.o. box 80 17 09, 81617 munich, germany ? epcos ag 2012. this brochure replaces the previous edition. for questions on technology, prices and delivery please contact the sales offices of epcos ag or t he international representatives. due to technical requirements components may contain dangerous substances. for information on t he type in question please also contact one of our sales offices.
8 august 08, 2012 important notes t he following applies to all products named in this publication: 1. some parts of this publication contain statements about the suitability of our products for certain areas of application . these statements are based on our knowledge of typical requirements that are often placed on our products in the areas of application concerned. we nevertheless expressly point out that such statements cannot be regarded as binding statements about the suitability of our products for a particular customer application. as a rule, epcos is either unfamiliar with individual customer applications or less familiar with them than the customers themselves. for these reasons, it is always ultimately incumbent on the customer to check and decide whether an epcos product with the properties described in the product speci?cation is suitable for use in a particular customer application. 2. we also point out that in individual cases, a malfunction of electronic components or failure before the end of their usual service life cannot be completely ruled out in the current state of the art, even if they are operated as speci?ed. in customer applications requiring a very high level of operational safety and especially in customer applications in which the malfunction or failure of an electronic component could endanger human life or health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by means of suitable design of the customer application or other action taken by the customer (e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the event of malfunction or failure of an electronic component. 3. the warnings, cautions and product-speci?c notes must be observed. 4. in order to satisfy certain technical requirements, some of the products described in this publication may contain substances subject to restrictions in certain jurisdictions (e.g. because they are classed as hazardous) . useful information on this will be found in our material data sheets on the internet (www.epcos.com/material). should you have any more detailed questions, please contact our sales of?ces. 5. we constantly strive to improve our products. consequently, the products described in this publication may change from time to time . the same is true of the corresponding product speci?cations. please check therefore to what extent product descriptions and speci?cations contained in this publication are still applicable before or when you place an order. we also reserve the right to discontinue production and delivery of products . conse- quently, we cannot guarantee that all products named in this publication will always be available. the aforementioned does not apply in the case of individual agreements deviating from the foregoing for customer-speci?c products. 6. unless otherwise agreed in individual contracts, all orders are subject to the current version of the general terms of delivery for products and services in the electrical industry published by the german electrical and electronics industry association (zvei) . 7. the trade names epcos, baoke, alu-x, ceradiode, ceralink, csmp, cssp, ctvs, deltacap, digisimic, dssp, filtercap, formfit, miniblue, minicell, mkd, mkk, mlsc, motorcap, pcc, phasecap, phasecube, phasemod, phicap, siferrit, sifi, sikorel, silvercap, simdad, simic, simid, sineformer, siov, sip5d, sip5k, thermofuse, windcap are trademarks registered or pending in europe and in other countries. further information will be found on the internet at www.epcos.com/trademarks.
|
